MAMBAPOD | Portable tripod that can be set up anywhere

Story

Hello everyone, we are Silence Corner and we are back🤗, Super excited to start this new adventure with you, We bring you this portable tripod that you can set up anywhere. With its compact size and special clamping function, it meets most of your needs while providing unimaginable convenience😉

Presented to you : 

✱Features an innovative patented folding clamp design, allowing it to assist your photography activities in four modes. It’s a camera accessory tailored specifically for city photographers.

• Clamp mode
• Desktop mode
• Hook mode
• Handheld mode

The weight of the camera in the video is = Canon R6II+RF70-200 F2.8=1880g)

With MAMBAPOD, you can easily set it up at any position during city roaming. Benefiting from the innovative design of the folding clamp, when used as a tripod, It has a unique appearance that makes it look gorgeous and futuristic.🤩

✱How to use the clamp function. 

• (1)Fix the angle of the tripod
• (2)Open the tripod legs
• (3)Open the folding clamp
• (4)Rotate the locking lever until it is tight
• Done!

✱Clamping range

• Folding clamps can be clamped on round object
• Use the pressing block to clamp onto a flat surface
• Round object clamping range:20~80mm 
• Flat surface clamping range: 0~85mm

✱Load Capacity

• It is recommended to use the clamping function when the clamped object is parallel to the ground.
• When the clamped object is perpendicular to the ground, the clamp needs to be pressed tightly against on it.
• If the object to be clamped is perpendicular to the ground, it will not be possible to clamp the object stably when installing a camera of more than 2kg.
• Load Capacity (horizontal): 5kg
  Load Capacity (vertical): 2kg

✱Weight

• The weight of MAMBAPOD+ Hollowed-Out Ball Head is 320g+160g=480g
• The weight of a commercially available camera clamp is about 300g.
• Lightweight desktop tripod (metal material) is 200g ± 50g
• Lightweight ball head (metal material) is about 200g
• If you carry both the tripod and clamps, the total weight will be :
• 300g+200g+200g=700g(220 grams heavier than MAMBAPOD)

The increased size makes it inconvenient to carry, not to mention the tedious operation of disassembling and reassembling the camera between the tripod and the clamp.

✱Image

The open tripod resembles a Mamba snake. The sharp fangs will bite the prey tightly and will not relax easily, assisting you to take photos stably and reliably.

✱When used as a tripod, the MAMBAPOD features two adjustable angles, making it suitable for a wide range of scenarios.

✱Unfolding the folding clamp, it can serve as a hook tripod, significantly enhancing the product’s versatility with multiple functions.

✱The unique hexagonal design provides the MAMBAPOD with a good grip, ensuring comfortable and stable use as a selfie stick.

✱UNC3/8” base screws can be reversed and switched to UNC1/4”

✱UNC1/4” on MAMBAPOD can directly install action cameras or 360 cameras

✱Or use the Arca-Swiss compatible phone clip to mount your phone on the hollow ball head.

✱The tripod also has six additional 1/4-inch screw holes for attaching fill lights, smartphones, or other devices.

✱ MAMBAPOD
Weight: 0.32 Kg
Dimensions: 188*48*40mm
Material: Aluminum, Steel , Rubber
Position Angle : 35 degrees/158mm; 70 degrees/78mm
Maximum load capacity of tripod: 5kg
Base Screw: UNC 3/8-inch can reverse to 1/4-inch

✱ Foldable clamp
Clamping Range(round):20~80mm 
Clamping Range(square): 0~85mm
Load Capacity (horizontal): 5kg
Load Capacity (vertical): 2kg

✱ Hollowed-out ball head
Arca-Swiss compatible
Ball diameter: 26mm
Height : 65mm